Example certificate of testing and safety

Example Electrical

0400 000 000 · hello@example.com

Gold Coast QLD

CERT-0001

CERTIFICATE OF:

(Please mark relevant check-box)

TESTING AND COMPLIANCE(Electrical installation)

Issued in accordance with s229 of the Electrical Safety Regulation 2026

✕TESTING AND SAFETY(Electrical equipment)

Issued in accordance with s208 of the Electrical Safety Regulation 2026

* Work performed for:

Name

TitleMs

Given name/sSam

SurnameCitizen

Address

Street12 Example Street

Suburb/townSouthport

Postcode4215

* Electrical installation / equipment tested (including site address for electrical installation work if different from above)

Repaired a commercial pie warmer: replaced the element and supply flex, tested before returning to service.

Date of test8 October 2026

Electrical contractor licence number00000

Name on contractor licenceExample Electrical

Electrical contractor phone number0400 000 000

For electrical installations, this certifies that the electrical installation, to the extent it is affected by the electrical work, has been tested to ensure that it is electrically safe and is in accordance with the requirements of the wiring rules and any other standard applying under the Electrical Safety Regulation 2026 to the electrical installation.

For electrical equipment, this certifies that the electrical equipment, to the extent it is affected by the electrical work, was tested to ensure it is electrically safe.

Date notice given

Test results · CERT-0001

Tested 8 October 2026 · AS/NZS 3000 & AS/NZS 3017

Circuit	Description	Cable	Protection	IR (MΩ)	Cont. (Ω)	Polarity	Conn.	RCD	EFLI (Ω)
1	Pie warmer, new element and flex	1.0 mm² 3-core flex	10 A plug	>200	0.31	✓	✓

IR = insulation resistance · Cont. = earth continuity · Conn. = correct circuit connections · RCD = trip test (and trip time) · EFLI = earth fault-loop impedance (N/A: not required, no socket-outlets)